Isosonic Dek 30 is a direct to joist acoustic flooring board for new build and refurbishment projects. It utilises an extremely dense resilient Isorubber layer that helps to reduce impact and airborne sound transfer.Benefits
- Provides structural deck and acoustic insulation.
- Continues to perform for the lifetime of the building
- Suitable for use with under floor heating.
- Simple installation.
Board Size: 25mm x 2.4m x 0.6m
Board Weight: 19Kg (84 boards per pallet)
The Isosonic Dekfloor 30 system consists of 30mm Isosonic Dek 30 boards fitted directly over timber floor joists. This makes it ideal for refurbishment projects where the floor boards are being replaced and a new acoustic floor is required.
To achieve Part E compliance 100mm thick low density mineral wool is required between the joists with an Isosonic Ceiling treatment below.
A metal frame ceiling utilising Isosonic Ceiling cleats is suitable for refurbishment projects. The increased performance requirement of new build projects means that the use of an Isosonic Ceiling system is required.
Isosonic Dek 30 is a 30mm thick structural acoustic floating floor comprised of 22mm P5 chipboard that is bonded to an 8mm thick dense rubber acoustic layer.
The chipboard layer has T & G joints that should be bonded with Floorbond adhesive.
The P5 chipboard used in the production of Isosonic Dek 30 is sourced from sustainable supplies. Isosonic Dek 30 has a Global Warming Potential of Zero and an Ozone Depletion Potential of Zero.