Home / Floors / TE Platinum Ground Floor Insulation

TE Platinum Ground Floor is a graphite enhanced EPS insulation board. Suitable for use beneath screeds and ground floor slabs it is an extremely cost effective alternative to PUR and PIR insulations.

Product Benefits:
  • Up to 40% cost saving over equivalent PUR solutions.
  • Non-hygroscopic.
  • Simple installation.
  • Zero ODP and GWP<5
  • Over 2 million m2 installed in the UK.
Board Size: 1.2m x 2.4m
Thickness: Available in 5mm increments from 25mm.
K-value: 0.030W/mk
Compressive Strength: 21kPa (@1% compression)

TE Platinum Ground Floor is a BBA certified versatile graphite enhanced EPS insulation that can be used with most types of ground floor construction. It is suitable for use above or below ground bearing slabs, in suspended beam & block and timber floor constructions. It can also be used with under floor heating systems.

TE Platinum Ground Floor can be used in domestic and commercial applications and is available in two grades: EPS70 and EPS100 depending on the compressive strength requirements of the product.

Available in 5mm thickness increments from 25mm TE Platinum Ground Floor insulation can be used to meet almost any U-value requirements. From standard regulation compliance and general improvement to achieving extremely low U-values for Code for Sustainable Homes or FEEs compliance.

A cost effective solution, TE Platinum Ground Floor is significantly cheaper than the equivalent PUR, PIR and Phenolic board insulations that provide the same thermal performance.

With a BRE Green Guide A+ rating TE Platinum Ground Floor Insulation has excellent environmental credentials. It is 100% recyclable, has a Global Warming Potential of less than 5 and an Ozone Depletion Potential of Zero. No CFCs, HFCs or HCFCs are used in the production of TE Platinum Ground Floor insulation.